PCM-F16:16 voices RS232 E1 ETH Fiber optical Multiplexer,16*FXO/FXS E&M PCM multiplexer

PCM-F16:16 voices RS232 E1 ETH Fiber optical Multiplexer,16*FXO/FXS E&M PCM multiplexer
PCM-F16:16 voices RS232 E1 ETH Fiber optical Multiplexer,16*FXO/FXS E&M PCM multiplexer
Thương hiệu: FastFOM Telecom
Mã sản phẩm: PCM-F16:16
Sẵn sàng: Còn hàng
Giá: 0đ
Phí đưa hàng: 0đ
Số lượng:  
   - Hoặc -   

16 voices+4RS232+4E1+2ETH Fiber optical Multiplexer,16*FXO/FXS E&M PCM multiplexer:PCM-F16


PCM-F16 is a kind of point-to-point fiber transmission multiplexer that developed based on special large scale integrated circuits. It is with perfect alarm function, and has an alternative of 2 100M linear Ethernet ports, 1~16 channels voice ports and 4 E1 ports, 4RS232 and 2 extended ports(asynchronous data、switch value、E1).
It can realize SNMP management on stand-alone device via built-in SNMP module. The electric parts are all digital with small volume, high reliability, convenient for maintenance.
The device offers 16 channels voice+2 ETH(PORT1), other functions are optional.

01.Based on IC of independent intellectual property rights.
02.Adopt veneer structure.
03.Can control the remote alarm status;
04.E1 is conformed to G.703, adopts full digital clock recovery and smooth phase lock technology;
05.Offer 2 extended ports for 1~4 asynchronous data, such as RS232/ RS485/RS422/Manchester, or 1~8 switch value,1~4 E1, 1~4 channels voice, or 2/4 wires audio etc;
06.Ethernet support Auto-MDIX;
07.1~16 voices access and support call indication;
08.Audio ports support FXO and FXS,FXO connected with switches,FXS with users' phone;
09.Support SNMP management, and network management cascading (optional);
10.Can distinguish the opposite device is shut down or fiber not connected well when testing lost optical signal;
11.User can become conscious of the temperature and voltage of the local device in network management stage;
12.User can also become conscious of the temperature and voltage of the remote device in SNMP managing interface, and can set the alarm threshold of the remote device’s temperature;
13.Power supply:AC220V、DC-48V/DC24V etc;
14.More than 2~120km no relay transmission distance;

Fiber interface
Optical wavelength:1310nm/1550nm(single-mode)
850nm/1310nm(multi-mode) for option
Optical interface:SC/FC/ST for option
Sending consumption: -9dBm/-5dBm
Receiving and dispatching module:>-6dBm
Optical receiver receiving sensitivity<-36 (BER<10):
Optical code:NRZ
Transmitting range: MM0~2Km; SM 0~120Km for option

E1 interface
Interface code:HDB3 code
Line speed:2.048Mbp/s ±50ppm
Interface standard:ITU-T G 703
Interface impedance:75ohm/unbalanced (BNC) or 120ohm/balanced(RJ45)
Allowed attenuation:0~6dBm

FXS Telephone Port
Ring voltage: 75V
Ring frequency:25HZ
2 line input impedance:600Ω (hanging off)
Wastage: 40db

FXO Exchange Port
Ring detecting voltage:35V
Ring detecting frequency:17HZ-60HZ
2 line input impedance: 600Ω (hanging off)

2/4 wire E&M interface card   
Channel quantity per card: 2  
Standard referred to: ITU-TRECG.714
Transmit relative level: +3,0, -3dBr adjustable
Receive relative level: +3,0, +3dBr adjustable
Signaling mode: E&M
Interface impedance: 600Ω
Subscriber physical connector: RJ45

10/100Base-T Port
Rate:0/100M, full/duplex auto-negotiation
Protocol:Support IEEE 802.3, IEEE 802.1Q (VLAN)
MACAddress Entiries:4096Entiries

RS232/Console port
Rate:600Kbps (Asynchronous)
Interface characteristic:  satisfies ITU-T V.24 standard

485 mm(L)*252 mm(W)*43mm(H)

Power supply
AC220V:input voltage AC 180V~260V
DC-48V:input voltage -36V~-72V

Operation Condition
Voltage:AC180V ~ 260V; DC –48V; DC +24V
Operating temperature:0°C~50°C
Storing temperature:40°C~+70°C
Relative humidity:95 %


Typical Application

16 FXO/FXS fiber multiplexer


Viết bình luận


Nội dung: Ghi chú: Comment là không có nội dung html!

Đánh giá: Kém           Tốt

Nhập mã vào ô bên dưới:

Quản lý bởi Lotus Asia
Lotus Co., Ltd © 2018